ENGINEERING PLASTICS

PEEK


PEEK, chemically known as polyetheretherketone, is a unique semi-crystalline engineering thermoplastic that also offers excellent chemical compatibility. Parts manufactured with PEEK thermoplastic polymer can operate at high temperatures, reaching up to 260°C (480°F), and its melting point is around 341°C (646°F). PEEK plastic is often used in environments with the presence of water or hot steam, as it maintains its physical properties, such as flexural and tensile strength, at a high level despite the harsh conditions. Polyetheretherketone is typically considered one of the engineering thermoplastics with a higher cost, however, experienced users recognize the added value that PEEK materials bring, as they allow for the production of lighter, stronger parts capable of surviving longer in challenging conditions.

Features:

High temperature resistance: Can be continuously used at 250°C (480°F) and in hot water or steam without permanently losing its physical properties.
Excellent chemical resistance.
Very low moisture absorption.
Inherently good wear and abrasion resistance.
Maintains good dimensional stability.
High mechanical strength.
Not affected by continuous exposure to hot water or steam.
Excellent resistance against high-energy radiation.


Peek Sheet

2541100005
PEEK 450-G NATURAL PLACA DE 1-1/4" X 24" X 48"
2541100006
PEEK 450-G NATURAL PLACA DE 1-1/2" X 24" X 36"












Close
Send us a message